Steel Sheet Pile is a long strip structure made of steel with an interlocking design on the edges. It is a type of steel with a lock. Its cross-sections include straight plate, groove, and Z-shaped. It is used to build retaining walls, cofferdams, revetments, and other civil engineering structures. There are various sizes and interlocking forms, and there are many models. Wanzhi Steel provides surface galvanizing, welding, stamping, and other processing services, and has a large amount of 6-25mm thickness stock storage. Welcome to contact us for communication.

Steel Sheet Pile Specification

Item	Steel Sheet Pile
Delivery Time	15-21 days
Processing Service	Bending, Welding, Decoiling, Punching, Cutting
Technique	Cold rolled sheet pile/Hot rolled
Shape	U-shape, z shape,h shape…
Type	Larssen Sheet Pile
Length	9M 12M 15M 18M
Thickness	6-25mm
MOQ	5 Ton
Material	High Strength Low Alloy Steel, Q235/Q235B/Q345/Q345B/SS400/S355G/S390GP
Steel Grade	S275,S355,S390,S430,SY295,SY390,Grade50,Grade55,Grade60,A690
Size	400*100-400*125-400*170
Surface	Bare steel, painting, or galvanizing

Steel Sheet Pile Advantages

High strength: Able to withstand large soil pressure and water pressure, suitable for deep foundation pits and high load environments.

Convenient construction: Steel sheet piles can be quickly installed by vibrating hammers or hydraulic pile drivers, with high construction efficiency.

Reusable: Steel sheet piles can be disassembled and reused, reducing engineering costs.

Adaptable: Suitable for various geological conditions, including soft soil, sand, and rock.

Waterproof performance: Through interlocking design, steel sheet piles can form a continuous waterproof barrier, suitable for cofferdam and bank protection projects.

Uses

Retaining wall: Used to support soil to prevent landslides or collapse, commonly seen in roads, railways and building foundation pits.

Cofferdam: Temporary or permanent water retaining structure in water conservancy projects, such as bridge foundation construction, wharf construction, and river regulation.

Bank protection: Protect river banks and coasts from water erosion and keep the coastline stable.

Underground structure: External wall support of underground parking lots, tunnels, and basements.

Temporary structure: Temporary support and protection, such as construction site enclosures and temporary roads.

Pollution isolation: Used to isolate contaminated soil or water to prevent the spread of pollutants.

Types of steel sheet piles

Steel sheet piles are mainly divided into the following types according to their cross-sectional shapes:

U type sheet pile

Also known as Larsen steel sheet pile, its cross-sectional shape is “U” shaped, consisting of a longitudinal thin plate and two parallel edge plates.

It has a wide range of specifications and models, a stable cross-sectional shape, is not easy to deform, has a strong bearing capacity, can withstand large horizontal and vertical loads, and is suitable for deep foundation pit projects and river cofferdams.

Z type steel sheet pile

Its cross-sectional shape is “Z”, consisting of two parallel thin plates and a longitudinal connecting thin plate. Z-type steel sheet piles can be spliced ​​and extended, and are suitable for projects that require a longer length.

It has a compact structure, good water tightness, and impermeability, and is more prominent in bending resistance and bearing capacity. It is suitable for projects with large excavation depths, hard soil layers, or that need to withstand large water pressure.

 

Tubular steel sheet pile

Relatively rare, its cross section is circular, and it is made of a thick-walled cylindrical thin plate. It has good compressive resistance and bearing capacity, and its performance is better than other types on some occasions.

AS type steel sheet pile

It is widely used in Europe and the United States, with a specific cross-sectional shape and installation method, suitable for special projects. The production, processing and installation processes of Z-type and AS-type steel sheet piles are relatively complicated.

What is PZ,PZC sheet pile？

PZ and PZC sheet piles are also called Larsen sheet piles, which are mostly used in the United States, and some Central American countries also use this type of material.

Larsen steel sheet piles are widely used in coastal projects. At the same time, under the condition that the foundation bearing capacity is below 100KN/m2, hot-rolled steel sheet piles can be driven into the foundation more than 30 times.

What is a hot rolled steel sheet pile?

Hot rolled steel sheet piles are the same as the cold-bent steel sheet piles mentioned above. They are made of thinner steel plates (wall thickness 8mm~14mm) and are processed by roll forming machines.

What is Hoesch Z Type Sheet Piles?

The anchor structure generally uses Z-type steel sheet piles, and its strength calculation is the same as that of the steel sheet pile wall, that is, the standard load value calculated by the hot-rolled Z-type steel sheet pile multiplied by the comprehensive load factor should be less than or equal to the design value specified in the specification. The comprehensive load factor for the strength verification of reinforced concrete components is 1, and the comprehensive load factor for cracking calculation and crack width calculation is 0.85.

PZ27 Sheet Pile VS pz22 sheet pile

The main difference between the two is the size.

Size	Nominal Width in.	Wall Depth (Height) in.	Web Thickness in.	Flange Thickness in.	Area in.2	Weight Per Foot	Weight Per Foot	Moment Of Inertia	Section Modulus
						lbs/ft	lbs/ft2	in.4/ft	in.3/ft
PZ 22	22	9.25	0.375	0.375	12.2	40.3	22.6	85.1	18.4
PZ 27	18	12.1	0.375	0.375	12.2	40.5	27.7	187.3	31
PZ 35	22.64	15.1	0.5	0.605	19.4	66	35	369.4	48.9
PZ 40	19.69	16.4	0.5	0.6	19.28	65.6	40	502.7	61.3

Price

The price of steel sheet piles is affected by material, specifications, length, and surface treatment. The following is a rough range:

 

Material cost

Ordinary materials are $500 to $800 per ton. High-strength steel sheet piles are $1,000 to $1,500 per ton.

Installation cost

The installation fee is usually calculated per square meter, which is about $20 to $50.

Total cost

For a medium-sized project, the total cost of steel sheet piles may be between $100 and $300 per linear meter, including material, transportation, and installation costs.

Steel sheet piles Cases

Steel Sheet Pile For Sale – Wanzhi Steel

As a versatile structural material, steel sheet piles play an important role in civil engineering and water conservancy projects. Although their initial cost may be high, their long-term benefits and environmental friendliness make them a worthwhile investment. Wanzhi Steel has a full range of options and offers a variety of additional services and surface treatments. As a professional steel sheet pile manufacturer in China, our experienced engineers are always ready to solve your problems.

 

 

If you have other questions, don’t hesitate to Get In Touch With Us. ( Inquire Online or send an email to Info03@wanzhisteel.com.)

 

 

Leave Us A Message