Chain link fence is made of high-quality low carbon steel wire, processed by cold galvanizing and hot dip galvanizing. Also known as cyclone fence. Its features are non-corrosive, impact resistance, open view, uniform mesh, customizable mesh width, thicker wire diameter, and vibrant colors, Vinyl Coated Chain Link Fence by Wanzhi Steel is on hot sale, and colors can be specified. Some clients don’t know how to install it properly, this section will talk about how to install a chain link fence, what depth to dig the hole, how to choose the right fence for you, some of its main types, what to look out for and where to buy a chain link fence.

Types of Chain Link Fence

Generally, we choose different types of outlining mesh for different purposes. For ordinary environment and harsh environments, the material and surface treatment needed are also different, refer to the following information.

 

1. Plastic-coated chain link wire mesh– high-quality PVC, PE plastic-coated wire, the inner wire can be black iron wire, cold galvanized, or hot galvanized wire. Its mesh range is 20-120mm, wire diameter range (after plasticizing) is 2mm-6mm.

2. Stadium Chain Link Fence–This kind of fence uses PVC coated wire, it is woven by machine after bending, used in ball game field fences, wire diameter of 3.8mm or 4mm, mesh 50 mm*50 mm.

Coal Chain Link Fence Mining Chain Link Fence (Mining Rhombus Bracket Protection Mesh)–Low carbon steel wire, cold galvanized wire, hot galvanized wire, wire diameter 2mm-4mm, mesh 5mm-6.5mm, generally more grip edge treatment.

3. Chain link Mesh for Slope Protection – Use PVC-coated GI wire, cold and hot galvanized steel wire as material, used for the protection of mountains and slopes, to prevent and control the occurrence of natural disasters such as rock avalanches and rolling stones. Wire diameter: 2mm-4mm Mesh: 40mm-15mm.

How to install a chain link fence?

First, we need these tools: A screwdriver, drill, scissors, tape measure, level, marker, fence puller, and others.

· Materials Required: Chain link fence,   beams, fasteners, end post, intermediate post, tension wire, fence ties, tension bands, top rail, end post cap, intermediate post cap, tension bar, concrete (optional)

· Estimated Completion Time: 1 day (2-3 days if using concrete)

· DIY Experience Required: Medium-High

 

1. Preparation stage – remove obstacles, measure the length, mark the interval, the position of the door, and evenly mark the position of the columns

2. Installation of columns – dig a suitable size pit, put the columns vertically, and fill it with concrete or gravel.

3. Install the crossbeam–Place the crossbeam on the top of the fence and fix it with fasteners (e.g. screws or clips). (The same method is used for installing the bottom crossbeam)

4. Laying wire mesh– unroll the wire mesh and secure its edges to the posts and beams using fasteners

5. Detail adjustment – adjust the tightness of the wire mesh as needed to ensure that there is no sagging and edges are not neatly trimmed

6. Cleaning and inspection–Clean up the garbage during the installation process, and check every part of the fence to make sure the installation is solid and undamaged.

How deep should chain link fence posts be buried?

For a 6-foot chain link fence, the posts should typically be buried at least 2 feet deep. This depth ensures fence stability, withstanding wind, and tension from the chain link fabric. However, soil conditions and local codes, which may require deeper post holes or additional measures for stability, should be considered.

1. Using a spade dig a hole for each of the corner, gate, and end post locations.

2. The holes should be three times wider than the posts.

3. The depth of the hole should be 1/3 the length of the post.

4. Then, fill them using one of the following options

 

Please refer to specific proposals

CONCRETE: For best results fill the holes with 4 inches of gravel and pat it down so that it is compact then add 6 inches of concrete on top. Then put the posts into the wet concrete and allow at least 1 day for the concrete to set. Fill the rest of the hole with dirt.2)

WITHOUT CONCRETE: Put the pole in the middle of the hole then fill the hole full of large stones to hold the pole in place. Then add earth until tight and compact.

What is the price of a chain link mesh?

The price of a piece of chain link fence is determined by the quantity ordered, mesh size, wire diameter, surface finish, and international wire mesh quotations, and we offer a large discount for bulk orders.

If you also want to buy or want to know more information about chain link fence. Welcome to contact us for a quotation, we also have a free sample sending service.

Notes on the installation process

1. During installation, always follow the manufacturer’s instructions and safety guidelines. If you encounter difficulties, you can ask for professional or manufacturer’s guidance.

2. We should not ignore Safety, using cotton and linen gloves will save your hands from the risk of cuts.

3. Since outdoor environments are Chain link fence usually use, please make sure you have specified its surface technology, material, and service life when you purchase it, and it is especially important to choose a reputable supplier.

Where to buy chain link fence?

Wanzhi Steel is a professional chain link fence manufacturer with dozens of automatic weaving machines, rich experience in exporting, and many partners, we produce chain link fences that meet every national standard.

In Wanzhi, there are GI Chain Link Fences, Vinyl Coated Chain Link fences, and PVC Coated Chain Link Fences for sale.

Welcome to Request An Online Quote.

 

My WhatsApp: +86 13938459717（Click To Chat With Me）

My Email: info03@wanzhisteel.com (Click To Email Me )

 

 

 

Leave Us A Message